Industrial solutions
Wear solutions engineered by failure mode
Clad plate, impact blocks, high-temperature alloy, matched fasteners and weld consumables, specified against the mechanism that is actually destroying your liner.
How we specify
Hardness is the number everyone quotes and the worst single predictor
Four mechanisms account for almost all liner failures in bulk material handling. Identify the dominant one and the material selection follows.
Sliding abrasion
Fine, dry material moving across a surface under low load. Hardness and surface finish dominate; a smooth as-clad face keeps material moving instead of packing.
Impact
Large lumps landing from height. A hard overlay alone will crack; the answer is section thickness and geometry, which is where Arcoblock belongs.
Corrosion
Moisture, chlorides or process chemistry undercutting the wear face. The overlay must resist the chemistry, not just the abrasive.
Thermal
Elevated or cycling temperature softening a conventional overlay. Arcotuff retains hardness where standard chromium carbide plate anneals.
By industry
Where wear decides the schedule
The Arco range
One coherent system, not five unrelated purchases
Send us the wear zone
Drawings, photos, material and throughput. We will come back with a specification, a fabrication scope and an expected campaign life.