Bolt-on wear block
Arcoblock
Modular high-impact blocks for point-load wear zones
Overview
What Arcoblock is
Arcoblock concentrates protection where the tonnage lands. Thick clad blocks are supplied ready to bolt or weld into impact plates, feeder pans and grizzly bars, so a single hot spot can be renewed without cutting out a full liner panel.
Key features
- Replace one block instead of a full panel
- Sized to survive primary impact loads
- Interlocking layouts limit material bypass
- Fitted from inside the chute where access is tight
Typical applications
- Primary crusher impact plates
- Apron feeder pans
- Grizzly bars
- Rock boxes
Specification & grades
- Block thickness
- 25 mm to 75 mm
- Overlay hardness
- 58-65 HRC
- Fixing
- Bolt-on or plug-weld
- Geometry
- Square, rectangular and radiused
Need a fabricated liner set?
Our ISO 9001:2015 workshop supplies Arcoblock cut, rolled and drilled to your drawings, ready to install in the shutdown window.
Send us your drawingsRest of the Arco range
Ready to put a number on your wear cost?
Send us the application. We will come back with a specification, a campaign estimate and the cost per tonne handled.